The CRUXWELD CARTO 3T is a three-shelf welding cart with a rear cylinder platform, two safety chains, two side hooks, solid rubber rear wheels and braked swivel casters. Park a compact inverter on the top shelf, chain the shielding-gas cylinder behind it, and move the whole welding station to the job.
Price, delivery & technical help — get a fast response.
Every welding job needs the same five things within arm’s reach: the machine, the gas, the leads, the consumables and the hand tools. The CARTO 3T gives each one a place, then puts the whole lot on wheels.
A 255 × 290 mm lipped platform behind the back panel carries the gas cylinder low, between the rear wheels. Two chains clip through eyelets at two heights so the bottle cannot tip when the trolley moves.
Bolt-on hooks on the side rail keep the torch, earth clamp lead and gloves off the floor and out of the shelves. Cables stay coiled, not kinked.
Solid rubber rear wheels roll over hoses, offcuts and expansion joints. The front casters swivel 360° and lock with a foot pedal so the cart stays put while you weld.
Top tray 450 × 275 mm for the machine, middle shelf 395 × 275 mm for consumables and the wire-feed or TIG kit, bottom shelf 440 × 290 mm for cables and the tool box. Lipped edges on every shelf.
No doors, no drawers to snag a torch hose. The angled rails and open back panel leave each shelf reachable from both sides of the cart.
A tubular loop handle bolted to the rails gives a two-hand grip at 850 mm, so the loaded cart steers through doorways and around the bench without bending.
Machine, consumables and cables each get their own shelf.
Rear platform with two retaining chains at two heights.
Swivel casters with foot brakes; solid rear wheels for pushing.
Compact inverter, cylinder, leads and tool box together.
Loaded welding station on the jobMachine, tool box and chained cylinder
Tools, leads, cylinder: everything in reachFront view, unloadedRear angle with cylinder chains
Rear wheels and front casters
How the trolley is loaded and moved, from the CRUXWELD Tech channel.
Measure the footprint of your welder against the top tray. Figures in millimetres, approximate.
Compact single-phase inverters sit on the 450 × 275 mm tray with the panel facing you. Send us your model if it is not listed and we will check the footprint and weight.
Thirteen part numbers, one flat carton, assembled with a spanner and a screwdriver.
Send the welder model and the cylinder size you use. Our technical team replies on WhatsApp with a fit check and a quotation for the CARTO 3T.
3-tier welding trolley
Shelf and overall dimensions are nominal and may vary by a few millimetres. Welding machine, gas cylinder, regulator, leads and tools shown in photographs are not included.
Rear wheels, braked casters, axle and roll pins.
Cylinder retaining chains with clips.
Side hooks and the bolt, nut and washer set.
The CRUXWELD CARTO 3T is a three-tier welding trolley built to turn a compact inverter and its cylinder into a mobile welding station. A sloped top tray of 450 × 275 mm holds the machine with its control panel angled towards the operator; a middle shelf carries electrodes, TIG filler, contact tips and the wire-feed or TIG kit; the lipped bottom shelf takes the welding leads, the earth clamp and a tool box. Behind the shelves, a 255 × 290 mm platform carries the shielding-gas cylinder, secured by two chains at two heights.
The whole cart is rated for 68 kg (150 lb) of total load. Two 178 mm solid rubber rear wheels carry most of the weight and roll over hoses and floor joints; two 71 mm front casters swivel through 360° for steering and lock with a foot brake so the trolley stands still while you weld. Two side hooks keep the torch and earth lead coiled and off the floor, and a tubular loop handle at 850 mm gives a comfortable two-hand push.
The CARTO 3T is sized for single-phase inverters such as the CRUXWELD ARC200iS, ARC251iS and ARC300iS MMA welders, the DC TIG 200 HF with its argon cylinder on the rear platform, and the FINELINE 80 plasma cutter. Compact MIG sets with a CO₂ cylinder also fit. If your machine is not listed, send us the model and we will check footprint and weight against the tray.
The trolley ships flat-packed in a 73 × 31 × 9 cm carton weighing 11.3 kg and bolts together with hand tools; shelves, rails, back panel, axle, wheels, casters, hooks, chains and all fasteners are included. Re-tighten the bolts after the first week, keep the casters free of wire offcuts, and wipe the painted steel finish down to keep it clean. Our technical team supports every CARTO 3T on WhatsApp and video call.
Note: the welding machine, gas cylinder, regulator, torch, leads and tools shown in the photographs are not part of the CARTO 3T and are available separately from CRUXWELD.
