Handheld Laser Welding Machine LUMO 1500 | 4-in-1 Weld, Cut and Clean

LUMO 1500
Handheld fibre laser welder • 4-in-1 • Model LUMO 1500

Weld, cut and clean. One handheld laser, 1500 W.

The CRUXWELD LUMO 1500 is a handheld laser welding machine for sheet-metal and stainless steel fabrication. One water-cooled system welds, cuts thin metal, cleans surfaces and cleans weld seams, with a 0.75 kg welding head on a 10 m cable and a separate automatic wire feeder.

1500 WLaser output
4-in-1Weld, cut, clean, seam clean
10 mCable to the head
220 VSingle-phase supply
🔥

Welds up to 3 mmDepending on material and joint
🧵

Automatic wire feeder0.8 to 2.0 mm filler wire
💬

WhatsApp + video supportSet-up help from our technical team

Price, delivery & technical help — get a fast response.

Overview

Four functions

One machine, four jobs

The operator picks the process on the touchscreen and fits the matching nozzle or lens. The functions are used one at a time. These clips show the handheld head at work.

1
JoinLaser weldingA fine, concentrated beam joins sheet and sections with low heat input. Corner, lap, fillet and butt joints, with or without filler wire.
2
SeparateMetal cuttingWith the cutting nozzle and gas, the same head cuts thin metal, listed up to 4 mm. Edge quality depends on material and settings.
3
PrepareSurface cleaningWith the cleaning lens, a scanning beam lifts rust and coatings from steel. Try a sample first on finished parts.
Weld seams before and after laser cleaning4
FinishWeld seam cleaningRemoves oxide and heat tint around a weld seam. The result depends on the material and the weld.
The system

What you get, named

The numbers on the photo match the list beside it.

LUMO 1500 handheld laser welding machine with 8 numbered parts12345678
1Welding head0.75 kg handheld head with wobble scanning and red-light aiming.
210 m cableFibre, water and gas lines in one sleeve, coiled on top.
3TouchscreenProcess settings and system status.
4Emergency stopCuts laser output at once.
5Chiller and laser buttonsSeparate switches for cooling and laser.
6Carry handlesFor positioning the cabinet.
7Wire feederSeparate automatic feeder with its own screen.
8Castor wheelsLockable, for moving around the workshop.
Welding in practice

Filler wire when the joint needs it

Close-fitting joints can often be welded without wire. Where there is a gap or the joint needs build-up, the automatic feeder delivers wire to the weld pool through a guide on the head.

LUMO 1500 laser welding stainless sheet with filler wireWire-fed seam on sheetWire guide and nozzle meet at the weld pool.
LUMO 1500 laser welding a stainless steel tube to a frameTube to frameThe slim nozzle reaches into corners.
The welding head

0.75 kg in the hand

LUMO 1500 handheld laser welding head with wire-feed nozzle
0.75 kgApproximate head weight
0–8 mmWelding scan width
±10 mmFocus adjustment
Built for long shifts

Wobble scanning, water-cooled

  • The beam scans side to side to bridge small gaps and widen the seam
  • Red-light aiming shows where the beam will land
  • Drawer-type protective lens, 18 × 2 mm, changed in seconds
  • Warning indicator on the head
LUMO 1500 nozzles for corner, flat, wire-feed and cutting work
Nozzles for corner, flat, wire-feed and cutting work
LUMO 1500 wire tip meets the nozzle
Wire tip meets the nozzle
LUMO 1500 nozzles and protective lenses
Nozzles and protective lenses
Why fabricators pick it

What the LUMO 1500 does for a sheet-metal shop

LUMO 1500 handheld laser welding machine: Less finishing after the weld

Clean seamsLess finishing after the weldControlled heat input helps limit distortion and discolouration on thin stainless. How much finishing remains depends on fit-up and settings.
LUMO 1500 handheld laser welding machine: Settings on one screen

TouchscreenSettings on one screenPower, scan width and speed, with system status.
LUMO 1500 handheld laser welding machine: Filler wire on demand

Wire feederFiller wire on demandSeparate automatic feeder for 0.8 to 2.0 mm wire.
LUMO 1500 handheld laser welding machine: Reach around large parts

10 m cableReach around large partsThe head parks in a holder on the cabinet.
LUMO 1500 handheld laser welding machine: Cooling built in

Water cooledCooling built inFront filling port and level gauge.
Wheels in, plug in, weldA mobile cabinet on castors that runs from a 220 V supply with argon or nitrogen shielding gas.
1500 Wlaser output
220 V50 Hz
5.5 kWrated power
Sample work

From the beam to the finished part

Each pair shows the handheld head at work and the result it leaves. Illustrative samples; results on your parts depend on material and settings.

01WeldingSeams, spot welds and butt joints
LUMO 1500 fish-scale seam, in processLUMO 1500 fish-scale seam, result
Fish-scale seamAn even, overlapping bead
LUMO 1500 laser spot welds, in processLUMO 1500 laser spot welds, result
Laser spot weldsTack points without a seam
LUMO 1500 butt joint, in processLUMO 1500 butt joint, result
Butt jointTwo edges joined flush
LUMO 1500 laser weld sample: pipe branch
Pipe branch
LUMO 1500 laser weld sample: t-joint
T-joint
LUMO 1500 laser weld sample: flat seam
Flat seam
LUMO 1500 laser weld sample: round part
Round part
02CuttingThin sheet cut by hand
LUMO 1500 carbon steel, in processLUMO 1500 carbon steel, result
Carbon steelStraight cut through sheet
LUMO 1500 stainless steel, in processLUMO 1500 stainless steel, result
Stainless steelCut edge after the pass
LUMO 1500 aluminium, in processLUMO 1500 aluminium, result
AluminiumCoated sheet, cut through
03CleaningRust, coatings and weld tint
LUMO 1500 laser cleaning sample: rust on sheet
Rust on sheet
LUMO 1500 laser cleaning sample: round part face
Round part face
LUMO 1500 laser cleaning sample: gear teeth
Gear teeth
LUMO 1500 laser cleaning sample: rusted shaft
Rusted shaft
LUMO 1500 laser cleaning sample: weld seam, before and after
Weld seam, before and after
LUMO 1500 laser cleaning sample: seam cleaning samples
Seam cleaning samples
Will it suit your job

Materials and limits

LUMO 1500 welding head in use on stainless sheet
< 3 mmWelding thickness, depending on material
< 4 mmCutting thickness, subject to trials
0–120 mm/sWelding speed range
StainlessSheet, tube and fabricated assemblies
Mild steelSheet, enclosures and frames
AluminiumSelected alloys, after a sample trial
Copper, brass and dissimilar metals: ask us for a sample trial before you specify them for production.
Applications

Where a handheld laser earns its keep

🍴

Kitchen equipmentSinks, tables and stainless sheet cabinets.
🚪

Doors, windows and railingsFrames, grilles and handrails.
🔌

Electrical enclosuresDistribution boxes and panels.
🪑

Stainless furnitureFrames, fittings and shelves.
🖼

Signage and decorative workChannel letters and trim.
🛠

Thin-sheet repairBrackets and general fabrication.
Laser safety

What the workplace needs

Laser safety eyewear rated for the 1080 nm wavelength. A normal welding helmet alone is not enough.
A controlled work area with screens, so the beam and reflections stay contained.
Trained operators only, with gloves and skin protection.
Fume extraction at the work area.
An earthed 220 V supply and a stable, level floor.
For load-bearing or pressure parts, use qualified procedures and inspection.
Daily care

Keeping it welding well

Check the protective lens for dirt or damage before each shift.
Keep the nozzle and the wire path clean.
Check the cooling-water level on the gauge.
Look over hoses and gas connections for leaks.
Keep the ventilation openings clear.
Never bend the cable tightly, crush it or pull the machine by it.

Send us your job. We will tell you if the LUMO fits.

Share the material, thickness, joint type and a photo of the part. Our technical team replies on WhatsApp with suitability, price and delivery, and can arrange a sample trial.

Specifications

LUMO 1500 Technical Data

Handheld laser welding machine

General
Model
LUMO 1500
Type
Handheld fibre laser welding machine
Functions
Welding, cutting, surface cleaning, weld seam cleaning
Laser
Laser output power
1500 W
Laser wavelength
1080 ± 10 nm
Aiming
Red light
Cable length
10 m
Process
Welding thickness
Below 3.0 mm, depending on material
Cutting thickness
Below 4.0 mm, subject to trials
Welding speed
0 – 120 mm/s
Shielding gas
Argon or nitrogen
Welding head
Head weight
0.75 kg approx.
Welding scan width
0 – 8 mm
Focus adjustment
±10 mm
Protective lens
18 × 2 mm
Head cooling
Water
Wire feeder
Type
Separate automatic wire feeder
Wire diameters
0.8 / 1.0 / 1.2 / 1.6 / 2.0 mm
Supply and size
Power source
AC 220 V, 50 Hz
Rated power
5.5 kW
Cooling
Water cooling, built in
Ambient temperature
10 – 40 °C
Cabinet size
920 × 550 × 920 mm
Packed weight
130 kg approx., in wooden case

Thickness figures are application limits, not guaranteed full-penetration values for every metal; confirm with a sample trial. Wire diameters depend on the rollers, liner and nozzle fitted. Cleaning width depends on the lens fitted. Specifications as published by CRUXWELD.

Accessories

Scope of supply

What comes with the machine

LUMO 1500 nozzle kit
  • 1LUMO 1500 cabinet with 1500 W fibre laser source and built-in water cooling
  • 2Handheld welding head with 10 m cable
  • 3Automatic wire feeder with wire guide tube
  • 4Nozzle set for welding, wire-feed and cutting work
  • 5Protective lenses
Confirmed on your quotation: the number of nozzles and lenses, the cleaning lens and tools. Not included: shielding gas cylinder and regulator, filler wire, laser safety eyewear for bystanders, fume extraction.

Description

About the product

LUMO 1500 handheld laser welding machine

The CRUXWELD LUMO 1500 is a 1500 W handheld laser welding machine that combines four metalworking functions in one mobile, water-cooled cabinet: laser welding, thin-metal cutting, surface cleaning and weld seam cleaning. It is made for fabrication workshops working on sheet metal, stainless steel assemblies, furniture and enclosures.

The welding head weighs about 0.75 kg and reaches the work on a 10 m cable, so the operator can move around large parts and into awkward joint positions. A touchscreen gives access to the process settings, red-light aiming shows where the beam will land, and the wobble function scans the beam up to 8 mm wide to bridge small gaps.

With or without filler wire

A separate automatic wire feeder delivers 0.8 to 2.0 mm filler wire for joints that need added material. Close-fitting joints can often be welded without wire once the settings are proven on a sample.

What to expect

Welding thickness is listed below 3 mm and cutting below 4 mm, depending on the material, joint and settings. Stainless steel, mild steel and selected aluminium alloys are the usual candidates. The machine runs from AC 220 V, 50 Hz, with argon or nitrogen as shielding gas.

The LUMO 1500 sits beside the IceFuse 250 cold welding machine, our TIG welding machines and the ProSpot 3500 spot welder for sheet-metal work. Our technical team helps with set-up on WhatsApp and video call.

Question & Answers

FAQ

Handheld Laser Welding Machine — Frequently Asked Questions

▸What is a handheld laser welding machine used for?
Joining sheet metal and light sections with a laser beam guided by hand. The LUMO 1500 also cuts thin metal, cleans surfaces and cleans weld seams.
▸Does it do all four functions at the same time?
No. The operator selects one process and fits the matching nozzle, lens or cleaning assembly.
▸What thickness can the LUMO 1500 weld?
Welding thickness is listed below 3 mm, depending on the material, joint design and settings. Send us your job and we will confirm with a sample trial.
▸Can it cut 4 mm metal?
Cutting thickness is listed below 4 mm. That is not a guaranteed 4 mm capacity on every material; it is confirmed by trial.
▸Does it need welding wire?
Only when the joint needs filler. Close-fitting joints can often be welded without wire after process trials.
▸Does it need shielding gas?
Yes. Argon or nitrogen, chosen for the metal and the process.
▸Can it weld aluminium?
Selected aluminium work may be suitable. Alloy, thickness, surface preparation and joint design are checked through a sample trial.
▸What power supply does it need?
AC 220 V, 50 Hz, with an earthed supply. Rated power is 5.5 kW.
▸Is a welding helmet enough protection?
No. Laser work needs safety eyewear rated for the laser wavelength, a controlled work area and fume extraction.
▸Will every weld be free of distortion and polishing?
No. Appearance, distortion and finishing depend on the material, preparation, fit-up and settings.
▸How do I get a quotation?
Send the material, thickness, joint type and a photo of the part on WhatsApp to +91 88008 82983. Our technical team replies with suitability, price and delivery.

Leave a comment

Your email address will not be published. Required fields are marked *

Handheld Laser Welding Machine LUMO 1500 | 4-in-1 Weld, Cut and Clean

WhatsApp chat