The CRUXWELD LUMO 1500 is a handheld laser welding machine for sheet-metal and stainless steel fabrication. One water-cooled system welds, cuts thin metal, cleans surfaces and cleans weld seams, with a 0.75 kg welding head on a 10 m cable and a separate automatic wire feeder.
Price, delivery & technical help — get a fast response.
The operator picks the process on the touchscreen and fits the matching nozzle or lens. The functions are used one at a time. These clips show the handheld head at work.
4The numbers on the photo match the list beside it.
12345678Close-fitting joints can often be welded without wire. Where there is a gap or the joint needs build-up, the automatic feeder delivers wire to the weld pool through a guide on the head.
Wire-fed seam on sheetWire guide and nozzle meet at the weld pool.
Tube to frameThe slim nozzle reaches into corners.








Each pair shows the handheld head at work and the result it leaves. Illustrative samples; results on your parts depend on material and settings.























Share the material, thickness, joint type and a photo of the part. Our technical team replies on WhatsApp with suitability, price and delivery, and can arrange a sample trial.
Handheld laser welding machine
Thickness figures are application limits, not guaranteed full-penetration values for every metal; confirm with a sample trial. Wire diameters depend on the rollers, liner and nozzle fitted. Cleaning width depends on the lens fitted. Specifications as published by CRUXWELD.

The CRUXWELD LUMO 1500 is a 1500 W handheld laser welding machine that combines four metalworking functions in one mobile, water-cooled cabinet: laser welding, thin-metal cutting, surface cleaning and weld seam cleaning. It is made for fabrication workshops working on sheet metal, stainless steel assemblies, furniture and enclosures.
The welding head weighs about 0.75 kg and reaches the work on a 10 m cable, so the operator can move around large parts and into awkward joint positions. A touchscreen gives access to the process settings, red-light aiming shows where the beam will land, and the wobble function scans the beam up to 8 mm wide to bridge small gaps.
A separate automatic wire feeder delivers 0.8 to 2.0 mm filler wire for joints that need added material. Close-fitting joints can often be welded without wire once the settings are proven on a sample.
Welding thickness is listed below 3 mm and cutting below 4 mm, depending on the material, joint and settings. Stainless steel, mild steel and selected aluminium alloys are the usual candidates. The machine runs from AC 220 V, 50 Hz, with argon or nitrogen as shielding gas.
The LUMO 1500 sits beside the IceFuse 250 cold welding machine, our TIG welding machines and the ProSpot 3500 spot welder for sheet-metal work. Our technical team helps with set-up on WhatsApp and video call.