Portable Gas Pipe Cutting Machine

TUBOCUT PYTHON
Chain-driven pipe cutting machine • Model TUBOCUT PYTHON

Wraps any pipe. Cuts it square or bevelled, from a remote.

Formerly sold as TUBOCUT-CS — same machine, new name

The CRUXWELD TUBOCUT PYTHON pulls itself around steel pipe on a roller chain. Add links and there is no upper limit on diameter. Set speed and direction on the handheld remote, and the torch cuts a clean circumferential or 45° bevel edge on pipe from 100 mm upward, with oxy-fuel or plasma.

Ø 100 mm+No upper limit
5–100 mmWall thickness
0–45°Bevel angle
16.5 kgCarry weight
✅

Spares in stockChain links, nozzles, torch, remote — shipped from our factory
💬

WhatsApp + video supportSetup and cut-quality help from our technical team
🏭

ISO-certified OEMGeM-registered Indian manufacturer since 1997
Need a magnetic or manual pipe cutter instead? TUBOCUT GECKO • TUBOCUT KOALA

Price, delivery & technical help — get a fast response.

Overview

How it works

The chain is the track. The pipe can be any size.

A roller chain wraps the pipe and hooks back onto the carriage. The motor turns a sprocket that climbs the chain, so the carriage walks around the pipe with the torch held at a fixed height. Larger pipe? Add chain links.

TUBOCUT PYTHON pulling itself around a pipe on its chainPIPE Ø 100 mm +Chain wraps the pipe • sprocket pulls the carriage round • add links for bigger pipe
01

Wrap the chainLay the chain around the pipe and hook it on the carriage. Add or remove links to match the circumference.
02

Tension and square upTighten the chain with the tension lever so the guide wheels sit flat and the carriage tracks true.
03

Set torch and bevelSlide the torch bar to the cut line, tilt the holder 0–45°, set nozzle height on the rack.
04

Run it from the remoteDial the speed (50–1150 mm/min), flick forward or reverse, and let the PYTHON crawl round in one pass.
Built for production

What makes the PYTHON different

Sprocket climbs a roller chain
Chain drive

Sprocket climbs a roller chain

The drive sprocket engages the chain link by link. Positive drive, no slip on scale or paint, and the same grip on 100 mm or 2,000 mm pipe.

Add links, cut bigger pipe
Unlimited diameter

Add links, cut bigger pipe

The chain is supplied in sections. Join more links and the PYTHON handles any diameter above 100 mm — no new machine for large-bore work.

Speed and direction in your hand
Remote control

Speed and direction in your hand

A handheld controller on a long cable: 0–10 speed dial, forward / off / reverse switch and a run indicator. Stand clear of the sparks and watch the cut.

Injector-type cutting torch
Oxy-fuel torch

Injector-type cutting torch

Three-hose injector torch with rack height adjustment and a tilting clamp. Cuts 5–100 mm wall with the right nozzle; a machine plasma torch mounts in the same clamp.

0-45 degree weld-prep bevel
Bevel

0–45° weld-prep bevel

Tilt the torch holder and the PYTHON cuts the bevel in the same pass as the parting cut. Pipe ends come off ready for fit-up.

Separate power source, 220 / 110 V
Power

Separate power source, 220 / 110 V

A compact power source with switch, fuse and carry handle runs the 20 W drive motor from a wall socket or a small generator.

What it cuts

Square, bevel, any size, from a distance

Circumferential cut

Square parting cut around the pipe — the standard job.

Bevel cut

Up to 45° bevel for weld preparation in the same pass.

Chain extension

More links, bigger pipe. No upper limit on diameter.

Remote operation

Speed and direction from the handheld controller.

In action

Shop floor to pipeline trench

TUBOCUT PYTHON: Large-diameter parting cutLarge-diameter parting cut
TUBOCUT PYTHON: Remote in hand, pipeline siteRemote in hand, pipeline site
TUBOCUT PYTHON: Oxy-fuel cut, fabrication shopOxy-fuel cut, fabrication shop
TUBOCUT PYTHON: Pipe-end cutPipe-end cut
TUBOCUT PYTHON: Chain wrapped and tensionedChain wrapped and tensioned
TUBOCUT PYTHON: Bevel cut on the remoteBevel cut on the remote
Videos

See the PYTHON cut

Full demo: gas and plasma cutting

Chain fitting, speed setting and cut quality with oxy-fuel and plasma.

Cutting line pipe in the trench

Customer site: PYTHON on large-bore pipe, run from the remote controller.

TUBOCUT PYTHON remote speed controller with connection cables
Remote controller

Run the cut from a safe distance

The PYTHON ships with a handheld controller on a long cable, so the operator stands clear of the sparks and slag while watching the kerf.

  • Speed dial 0–10 — 50 to 1150 mm/min, SCR controlled
  • Forward / off / reverse switch — back the torch off or make a second pass without touching the machine
  • Run indicator — power and direction at a glance
  • Plug-in cables — locking connectors to the carriage and the power source
TUBOCUT PYTHON scope of supply: carriage, cutting torch, remote speed controller, power source, cable, chain and nozzles
Anatomy

What is in the kit

Everything the PYTHON needs to cut, laid out.

  1. 01Cutting carriage — chain-driven, 20 W motor
  2. 02Drive chain — sections, join for larger pipe
  3. 03Remote speed controller — dial + direction switch
  4. 04Power source — 220 / 110 V, with fuse
  5. 05Injector cutting torch — with tilting clamp
  6. 06Torch bar + rack — height and cross adjustment
  7. 07Cutting nozzles — No.1, No.2, No.3
  8. 08Gas distributor — three hose connections
  9. 09Connection cables — locking connectors
  10. 10Guide wheels — four, steel
Choose your TUBOCUT

PYTHON, GECKO or KOALA?

Three pipe cutters, three ways to hold on to the pipe. Pick by how the machine grips and whether you have power at the cut.

TUBOCUT PYTHONTUBOCUT GECKOTUBOCUT KOALA
Grip on pipeRoller chain — positive drive on any surfacePermanent-magnet wheelsRoller chain
DriveMotorised, remote speed + directionMotorised, dial on carriageManual hand wheel — no electricity
Pipe diameter100 mm and up, no upper limit100 mm and up100 mm and up
Wall thickness5–100 mm5–100 mm5–50 mm
Bevel0–45°0–45°0–45°
TorchOxy-fuel or plasmaOxy-fuel or plasmaOxy-fuel
Weight16.5 kg20 kgLightest
Best forProduction cutting, large-bore and painted or scaled pipe, operator at a distanceFast setup, longitudinal and inside-wall cutsSites without power, occasional cuts
This pageSee TUBOCUT GECKO →See TUBOCUT KOALA →
Applications

Where the PYTHON earns its keep

🔧

Pipe spool fabricationRepeat parting and bevelling of spools before fit-up and welding.
🏭

Cross-country pipelinesLine pipe in the trench or on skids; the remote keeps the operator out of the sparks.
⛽

Refinery and plant maintenanceCutting out sections of process piping in position, any diameter.
🚧

Piling and structural tubeLarge-bore piles and columns cut to length on site — just add chain.
💧

Water mains and penstocksBig steel water pipe, square or bevelled.
⚓

Shipyards and offshoreScaled and painted pipe where magnets slip; the chain does not.

Tell us your pipe size. We will confirm chain length and nozzle.

Send the pipe OD, wall thickness and whether you cut with oxy-fuel or plasma. Our technical team replies on WhatsApp with the right setup and a quotation.

For this job, consider

Need a branch opening, not a cut-off? ORBICUT 600 pipe hole cutter.

This machine cuts pipe to length. For the round opening a branch pipe fits into, the ORBICUT 600 sits on the pipe and cuts it in one pass, with the bevel if you need one.

Holes Ø80–600 mm5–50 mm steelBevel 0–45°Follows the pipe curve

Specifications

TUBOCUT PYTHON Technical Data

Chain-driven pipe cutting machine

General
Model
TUBOCUT PYTHON
Previous model name
TUBOCUT-CS
Type
Chain-driven pipe cutting machine (portable, motorised, remote controlled)
Drive method
Motorised, roller chain and sprocket
Direction
Forward / reverse on remote controller
Cutting
Effective pipe diameter
100 mm onwards (no upper limit with additional chain links)
Cutting thickness (wall)
5 – 100 mm
Cutting shape
Square and bevel
Cut / bevel angle
Variable up to 45°
Cutting speed
50 – 1150 mm/min
Speed control
SCR; adjustment by dial on remote controller
Cutting torch
Injector type (oxy-fuel); plasma torch mountable
Electrical
Input voltage
AC 220 V / 110 V, 50/60 Hz, single phase
Motor
20 W, 10,000 rpm
Physical
Dimensions (L × W × H)
420 × 280 × 550 mm
Weight
16.5 kg
Optional
Additional chain sections; machine plasma torch

Specifications as published by CRUXWELD.

Accessories

Scope of supply

What comes in the box

TUBOCUT PYTHON scope of supply kit
  • 1TUBOCUT PYTHON cutting carriage with chain sprocket drive and four guide wheels
  • 2Drive chain in sections — join for larger pipe
  • 3Remote speed controller with dial, direction switch and cables
  • 4Power source 220 / 110 V with switch, fuse and carry handle
  • 5Injector-type oxy-fuel cutting torch with tilting clamp, rack and gas distributor
  • 6Cutting nozzles No.1, No.2, No.3
Optional: extra chain sections for very large diameters • machine plasma torch for use with a CRUXWELD FINELINE plasma source.
Spares

Spares we keep in stock

Chain links and sections

Chain links and sections

Replace worn links or extend for bigger pipe.

Cutting nozzles

Cutting nozzles

No.1 to No.3 for 5–100 mm wall.

Remote controller and cables

Remote controller and cables

Controller, cables and locking connectors.

Description

About the machine

TUBOCUT PYTHON chain-driven pipe cutting machine

The CRUXWELD TUBOCUT PYTHON is a portable, motorised pipe cutting machine that drives itself around steel pipe on a roller chain. The chain wraps the pipe and hooks back onto the carriage; a sprocket on the 20 W drive motor climbs the chain link by link, so the carriage travels the full circumference with the torch held at a fixed height. Because the chain is supplied in sections, there is no upper limit on pipe diameter — join more links and the same machine cuts large-bore line pipe, piles and penstocks.

With the standard injector-type oxy-fuel torch the PYTHON cuts wall thickness from 5 to 100 mm. Travel speed is set between 50 and 1150 mm/min on the handheld remote controller, which also carries the forward / off / reverse switch, so the operator stands clear of the sparks while watching the kerf. The torch holder tilts to 45° for a weld bevel in the same pass as the parting cut.

Chain drive versus magnets

A chain gives positive drive on painted, scaled or rusty pipe where magnetic wheels can slip, and the grip is the same on 100 mm pipe and on 2 m pipe. For quick setup on clean pipe, longitudinal cuts or inside-wall work, see the magnetic TUBOCUT GECKO; for sites without power, the hand-wheel TUBOCUT KOALA.

Oxy-fuel or plasma

The torch clamp accepts a machine plasma torch. Paired with a CRUXWELD FINELINE plasma source, the PYTHON cuts thinner wall faster and with less heat input; with oxy-fuel it handles thick wall up to 100 mm. Both setups are shown in the demonstration video above.

Power and portability

The carriage weighs 16.5 kg. A separate power source with switch, fuse and carry handle runs from 220 V or 110 V single phase, so the machine works in the shop and on site from a small generator. Chain sections, nozzles, torch, remote controller and cables are stocked at CRUXWELD, and our technical team supports every machine on WhatsApp and video call.

Model note: the TUBOCUT PYTHON was previously sold as the TUBOCUT-CS. Specifications, spares and accessories are unchanged.

Video

Play video
Play video

Question & Answers

FAQ

Pipe Cutting Machine — Frequently Asked Questions

▸What pipe sizes can the TUBOCUT PYTHON pipe cutting machine cut?
Any pipe from 100 mm diameter upwards. The standard chain covers pipes up to about 650 mm; with additional chain links the range extends to 2000 mm and beyond — there is no upper limit.
▸What wall thickness can it cut?
5 mm to 100 mm with the injector-type oxy-fuel torch. With a plasma torch mounted, thickness depends on the plasma cutter’s rating.
▸Can it cut a bevel for welding?
Yes. The torch holder tilts to any angle up to 45°, so a single-V weld preparation is cut in the same pass as the cut itself.
▸Does it work with plasma as well as gas?
Yes. The TUBOCUT PYTHON is designed for both oxy-fuel and plasma cutting; the plasma torch is mounted in place of the gas torch.
▸What power supply does it need?
220 V or 110 V, 50/60 Hz, for the 20 W drive motor. The cutting energy comes from the gas or plasma supply, so a small site generator is sufficient.
▸How is cutting speed controlled?
By SCR electronic control, continuously adjustable from 50 to 1150 mm/min on the carriage dial or on the remote control, so the operator can stand clear while trimming the speed.
▸Is it suitable for site work?
Yes. It is a one-person carry, sets up on the pipe in minutes with the chain, and runs from a generator.
▸How do I get the price and delivery time?
Request a quote on this page or message +91 88008 82983 on WhatsApp with your pipe diameters, wall thickness and process (gas or plasma). You will receive a GST quotation with delivery time, usually the same working day.
What pipe sizes are you cutting? We will confirm the chain length you need.

0 replies on “Portable Gas Pipe Cutting Machine”

WhatsApp chat