Solutions by industry

Machines for Battery Pack Makers

Lithium-ion packs for EVs, e-rickshaws, solar storage and tools — nickel-strip tab welding that is repeatable from the first cell to the ten-thousandth.

Find my machine →WhatsApp our technical team Get a quote

GeM Registered OEM Manufacturer · ISO 9001 · Supported Worldwide

Jobs this range is built for

18650 / 21700 cell packsNickel strip 0.1–0.3 mmE-rickshaw and two-wheeler packsSolar and UPS storagePower-tool packsBusbars and pack hardware

Recommended Cruxweld machines

CBS10M lithium battery spot welder10 kVA DC double-pulse, pedal operated

3500 A, double pulse
0.02–0.3 mm nickel strip
Built for 18650 pack lines

See the machine →

CBS10P pneumatic battery spot welder10 kVA DC double-pulse, air-driven electrodes

3500 A, double pulse
0.02–0.3 mm nickel strip
Foot-switch start, consistent electrode force

See the machine →

CLB5D pedal battery tab welder5 kVA entry-level tab welder

5 kVA on 220 V
0.03–0.45 mm strip
Pedal operated

See the machine →

CDS10M CD stud welderStuds M3–M10 on thin sheet

M3–M10 on steel, stainless, aluminium, brass
2500 J, 1–3 ms weld
Clean back face, 220 V

See the machine →

IceFuse 250 cold welding machine5-in-1: cold pulse, TIG, pulse TIG, clean, MMA

1–999 ms cold pulses
HF TIG and Pulse TIG
220/110 V single phase

See the machine →

How to choose

Starting out, small batches

CLB5D 5 kVA pedal welder — 0.03–0.45 mm strip.

Production packs, consistent nuggets

CBS10M 10 kVA DC double-pulse — 3500 A, 0.02–0.3 mm nickel strip.

High volume, same force every weld

CBS10P with air-driven electrodes and foot switch.

Threaded studs on pack housings

CDS10M capacitor-discharge stud welder, M3–M10, no marking on the face.

Thin stainless or copper tabs by TIG

IceFuse 250 cold-pulse TIG, 1–999 ms pulses.

Not sure which one?Send your material, thickness, application and a photo — our technical team replies with a model and quotation.

WhatsApp +91 88008 82983 Use the machine finder

Questions we get asked

Why double pulse for battery tabs?

The first pulse breaks through plating and oxide; the second makes the nugget. It gives a consistent weld on nickel-plated steel and pure nickel strip without burning the cell.

Pure nickel or nickel-plated steel strip?

Pure nickel carries more current and welds more consistently; nickel-plated steel is cheaper. Both weld on the CBS10M / CBS10P — settings differ, which our technical team shares with the machine.

Can you help set the parameters?

Yes — send your strip thickness and cell type on WhatsApp and we guide you on video call to the first good weld.