The CRUXWELD FINELINE 40C is a plasma cutter with inbuilt air compressor: a 40 A IGBT inverter and a 4–5 bar compressor in one 25 kg case that runs from any 230 V single-phase socket. Pilot-arc start, 10–40 A stepless control and a digital ammeter give clean, fast cuts in mild steel, stainless, aluminium and copper up to 12 mm — on site, on the roof, in the shop, wherever there is a plug. Engineered, assembled and tested in India by a GeM Registered OEM Manufacturer.
Price, delivery & technical help — get a fast response.
Every plasma cutter needs clean, dry compressed air — and on most jobs that means dragging a compressor, a hose and a second power lead to wherever the plate is. The FINELINE 40C plasma cutter with inbuilt air compressor removes that from the equation. Its own 4–5 bar compressor sits inside the case, so the only things you carry are the machine, the torch and the earth clamp. Plug into a 16 A single-phase socket, switch on, set the current and cut.
Inside is a 40 A IGBT inverter with pilot-arc starting: the arc is struck without touching the plate, so painted, rusty or expanded metal cuts cleanly and consumables last longer. A microprocessor controls the air sequence — pre-flow, cut, post-flow cooling — and the digital display shows the set current, with LED indicators for power and thermal protection.

Filmed on a production FINELINE 40C. Ask us on WhatsApp for a demonstration on your own material.
The plasma cutter with inbuilt air compressor has a louvred steel enclosure (IP21S) with forced-air cooling on both the inverter and the compressor; class H insulation; built-in over-current and over-temperature protection with LED warning.

| Material | Clean cut | Severance |
|---|---|---|
| Mild steel | up to 10 mm | 12 mm |
| Stainless steel | up to 8 mm | 10 mm |
| Aluminium | up to 8 mm | 10 mm |
| Copper / brass | up to 5 mm | 6 mm |
Clean-cut figures are for production-quality edges at normal hand speed with the standard torch; severance is the maximum the plasma cutter with inbuilt air compressor will part at slow speed. Rated maximum cutting thickness 12 mm.

Any job where the plate is away from the compressor: the FINELINE 40C goes to the work instead of the work coming to it. For thicker plate and shop production see the FINELINE 100IC (100 A, 25 mm) or the FINELINE 120.
Spare electrodes, tips and shield cups are available from stock; the exact scope is confirmed on the quotation. See the full range on our products page.


The ROTO 1000M circle cutting guide holds your plasma torch at a fixed radius from a magnetic centre, so holes, discs and flange blanks come out round instead of wobbly.
| Parameter | FINELINE 40C |
|---|---|
| Model | FINELINE 40C |
| Type | Plasma cutter with inbuilt air compressor, IGBT inverter |
| Input voltage | 230 V ±15% |
| Phase | Single |
| Frequency | 50 / 60 Hz |
| Rated input capacity | 5.5 kVA |
| Rated input current | 25.6 A |
| Main fuse | 16 A |
| Cutting current range | 10 – 40 A |
| Rated output voltage | 96 V |
| No-load voltage | 280 V |
| Max cutting thickness | 12 mm |
| Arc starting | Pilot arc |
| Compressor | Inbuilt, 4 – 5 bar |
| Power factor | 0.93 |
| Efficiency | 85% |
| Degree of protection | IP21S |
| Insulation | Class H |
| Cooling | Forced air |
| Torch type | Handheld |
| Dimensions (L × W × H) | 400 × 190 × 400 mm |
| Weight | 25 kg |
Specifications are subject to improvement without notice; the quotation and test certificate supplied with the machine are the governing documents. Warranty terms are stated on the quotation / invoice.