Solutions by industry

Machines for Fabrication Shops

Frames, trolleys, tanks, structures, panels and base plates — the machines Indian fabrication shops run every day, chosen by the job rather than the model code.

Find my machine →WhatsApp our technical team Get a quote

GeM Registered OEM Manufacturer · ISO 9001 · Supported Worldwide

Jobs this range is built for

Frames, trolleys and bracketsStructural beams and columnsTanks and long seamsPlate cutting and profilesBase plates and signboardsPipe spools

Recommended Cruxweld machines

MIG 400 – CWMIG400iJ400 A inverter MIG / gasless FCAW / MMA

400 A IGBT inverter
MIG, gasless flux-cored and stick
Mild steel, stainless and aluminium

See the machine →

ARC 400 – ARC400iS400 A three-phase stick welder

20–400 A digital IGBT inverter
2.5–5 mm electrodes incl. 7018 and 6010
415 V three phase

See the machine →

TriPhase 400iS400 A on single, two or three phase

Full 400 A on 230 V single phase and 415 V
Built-in VRD
1.6–5 mm rods

See the machine →

FINELINE 80IC plasma cutter80 A plasma with built-in twin compressor

Cuts 16 mm clean, 20 mm max
220 V single or 380 V three phase
No external compressor needed

See the machine →

CPG-NM pug cutting machineOxy-fuel rail cutter for plate

Straight, circle and bevel cuts
Steel plate up to 110 mm
Semi-automatic travel

See the machine →

WeldyFi fillet welding carriageTrackless carriage for long fillet welds

Magnetic 4WD, no rails
5–1100 mm/min travel
Quick torch clamp for MIG/MAG/FCAW

See the machine →

FLUXOR 1250 / 1000 SAWInverter submerged arc welding

2.4–6 mm wire
Self-propelled tractor with flux hopper
MMA and gouging modes

See the machine →

DynaCut ProX portable CNC plasmaCNC plasma and oxy-fuel cutting table

1500×3000 mm (extendable to 6000)
Plasma 1–30 mm, oxy-fuel 5–110 mm
Embedded CNC with FastCAM

See the machine →

How to choose

Mostly sheet and light sections up to 6 mm

MIG 300 or MIG 400 with solid wire; gasless flux-cored wire for site jobs.

Heavy plate, 7018 rods, multiple welders

ARC 400 on three phase; TriPhase 400iS where supply is single phase.

Long fillet or butt seams

Put the torch on a WeldyFi carriage — one operator, steady speed, clean beads.

Cutting plate up to 20–25 mm

FINELINE 80IC or 100IC with built-in compressor; CPG-NM pug cutter for thick plate and bevels.

Repeated profiles and parts

DynaCut ProX CNC plasma table — nest parts from DXF files.

Not sure which one?Send your material, thickness, application and a photo — our technical team replies with a model and quotation.

WhatsApp +91 88008 82983 Use the machine finder

Questions we get asked

Single phase or three phase for a fabrication shop?

If your shop has a 415 V supply, three-phase machines (ARC 400, MIG 400) give the full current for long shifts. On a single-phase supply, the TriPhase 400iS and MIG 300 give 400 A and 300 A respectively.

MIG or stick for general fabrication?

MIG is faster on sheet and clean plate and needs less cleaning; stick (ARC) handles rusty or painted steel, outdoor work and thick sections. Most shops keep both.

How do I get the right machine for my jobs?

Use the machine finder on the home page or send your material, thickness and a photo of the job on WhatsApp — our technical team replies with a model and quotation.