The CRUXWELD DentPro 90 is a dent puller spot welder for car-body repair. Weld a washer, pin or wiggle wire onto the dent, pull it back to shape with the slide hammer, then shrink stretched metal with the carbon rod, all from the outside of the panel.
GeM Registered OEM Manufacturer · Supported Worldwide · 45+ years of welding expertise
Price, delivery & technical help — get a fast response.
Most door, quarter-panel and roof dents can’t be reached from behind without stripping trim, glass or the inner panel.
A dent puller spot welder works from the outside: it tacks a small washer, pin or wire to the dent, you pull the metal back with a slide hammer, then twist the tack off and dress the spot.
The DentPro 90 puts seven of these jobs in one compact machine, from round and triangle washers to wiggle wire, studs and carbon-rod heat shrinking, with two guns, auto or manual operation and overheat protection, on an ordinary 220 V workshop socket.
Tap a mode to see what it welds to the panel and how you pull with it:
Tack round washers and pull larger, softer dents.
Pointed washers for small, sharp dents and near edges.
Weld tabs to pull with the hammer.
Weld a wavy wire along a long crease and pull it out in one go.
Heat and press small areas of the panel.
Heat-shrink stretched or oil-canned metal.
Weld pins to pull from.
Not sure? WhatsApp a photo of the dent and we will tell you which mode to use.
Pulling a door dentEasy to carry to the carShown on a workshop trolley
Consumables (washers, wiggle wire and carbon rods) are available as refills. Your quotation lists the exact kit supplied.
Tell us what you repair: we will suggest the kit and send a quotation for the dent puller spot welder.
| PARAMETER | DENTPRO 90 |
|---|---|
| General | |
| Model | DentPro 90 |
| Type | Dent puller spot welder / stud welder |
| Application | Car-body dent repair and panel correction |
| Input voltage | 220 V AC, single phase |
| Frequency | 50 / 60 Hz |
| Operation | |
| Operation mode | Automatic / manual |
| Working modes | 7: round washers, triangle washers, pulling tabs, wiggle wire, hot pressing, carbon rods, stud welding |
| Power adjustment | Adjustable |
| Welding thickness | 0.6 – 1.2 mm body sheet |
| Welding guns | 2 |
| Build | |
| Cooling | Air cooled, side ventilation |
| Protection | Automatic overheat protection |
| Dimensions | Approx. 205 × 320 × 255 mm |
| Weight | Approx. 24.4 kg |
| Earth cable | Approx. 1.4 m |
| Gun cable | Approx. 1.7 m |
| Gun length | Approx. 40 cm |
| Power cord | Approx. 1.5 m |
Specifications are subject to improvement without notice; the quotation supplied with the machine is the governing document. Warranty terms are stated on the quotation / invoice.
