Table Mounted Spot Welder

(No Ratings Yet)

Write a Review

Spec Sheet GET A QUOTE NOW

Electronic Switch – Rugged stable state digital timer, quick variety timing 5-50 cycles, long range timing 1-10 sec (50 to 500 cycles)
CURRENT CONTROL – By use of 3 primary and 3 secondary taps on the transformer to supply welding current adjustment in 9 steps, primary taps (high/low/medium) manipulated by a heavy duty snap motion rotary switch
WELD PRESSURE – Regulated by a sensitive spring passed on the welding head and controlled by a finely threaded large nut from 2 to 80 lbs
WELD INITIATION – By using a built-in switch which initiates the weld best after regular preset pressure is built up
CONSTRUCTION – Appealing designed welding head sporting the upper and lower electrode arms and spring handling mechanism equipped on the table
APPLICATIONS – The gadget is incredibly versatile being succesful to tackling delicate welds and on the other hand possesses adequate capability to weld M.S. rods upto 12 SWG. It is possible to weld to a excessive degree of accuracy materials which include brass, stainless-steel and so forth.

Specification	Unit	CST-3	CST-3.5
Input supply	Volt AC	220	220
Phase	No	1	1
Rating @ 50% duty cycle	KVA	3	3.5
Maximum available current (short circuit) @15% duty cycle	Amps	3600	3600
Mild steel sheet welding thickness range (min. to max.)	SWG	56 to 16	56 to 16
Mild steel wire welding thickness range (min. to max.)	SWG	30 to 12	30 to 12
Stainless steel sheet welding thickness range (min. to max.)	SWG	58 to 16	58 to 16
Stainless steel wire welding thickness range (min. to max.)	SWG	26 to 20	26 to 20
Brass sheet welding thickness range (min. to max.)	SWG	58 to 28	58 to 28
Brass wire welding thickness range (min. to max.)	SWG	20 to 14	20 to 14
Throat height	mm	100	100
Throat depth	mm	200	200
Electrode gap (max. to min.)	mm	10-3	10-3
Insulation	Class	F	F
Dimensions (LxWxH)	mm	1470x860x1340	1470x860x1340
Weight (approx)	Kg	110	110

Leave a comment